upper corner image upper corner image
RediRad classic car radio adapter lets you listen to MP3/Satellite/iPod/CD players through your AM, factory-original Radio!

RediRad classic car radio adapter lets you listen to MP3/Satellite/iPod/CD players through your AM, factory-original Radio!

Frequently Asked Questions

What is a RediRad™?

Which RediRad™ is right for my collector car?

How do I order a RediRad™?

What portable music players can I use with the RediRad™?

Will a RediRad™ work with a 6-volt electrical system?

How does the RediRad™ connect to the existing radio?

How does the RediRad™ work?

My car is in storage until spring. When does my 60-day evaluation period start?

Why does the RediRad™ use the AM band?

Does the RediRad add FM to my AM radio?

Is RediRad™ compatible with digital (quartz) tuners?

Will I experience broadcast interference while listening to music from my portable source?

Will the RediRad™ work with my original vacuum-tube radio?

Does the RediRad™ add FM to my AM radio?

Can I tune in broadcast radio with the RediRad™ plugged into my portable player?

Will the RediRad™ degrade regular, over-the-air broadcast signal reception?

What are the electrical requirements to use the RediRad™?

Does my car need an antenna to use a RediRad™?

 

 

What is a RediRad™?

The RediRad is an exciting, money-saving solution that allows you to enjoy music favorites from your portable music player through the existing radio in your collector car or truck.

Please click here for a video demonstration of the RediRad.

Back to top

 

Which RediRad™ is right for my collector car?

First, determine whether your car has a 6 volt or a 12 volt battery. Second, determine whether the electrical system ground is connected to the positive or the negative side of the battery. Third, determine whether your radio is AM-only or is an AM-FM. Click here for full product selection guide

Back to top

 

How do I order a RediRad™?

 Be sure to specify the appropriate model RediRad™ - Refer to the preceding question.

Back to top

 

What portable music players can I use with the RediRad™?

The RediRad will work seamlessly with virtually all portable music players (such as an iPod, jogger’s FM radio, MP-3, CD or a cassette player, or even satellite radio) with a headphone or a ‘line-out’ socket. (Use the headphone socket if your player has both output types.) .


Back to top

 

Will a RediRad™ work with a 6-volt electrical system?

YES! We are pleased to announce the RediRad™ for you folks with 6V electrical systems and with either positive or negative ground.

If your car has a positive ground electrical system, order model number RR106P.

If your car has a negative ground electrical system, order model number RR106N.

Back to top

 

How does the RediRad™ connect to the existing radio?

The RediRad™ installs easily with only four simple steps:

1. Connect power and ground wires to vehicle power and vehicle ground, respectively.

2. Unplug the vehicle’s antenna cable from the radio and plug it into your RediRad™.

3. Plug the male coaxial RediRad™ cable into your radio.

4. Insert the audio cable (1/8” male plug) into your portable player’s headphone socket.

For installation details on positive-ground electrical systems, please click here. (Stil updating)

For installation details on negative-ground electrical systems, please click here. (Still updating)

Back to top

 

How does the RediRad™ work?

The RediRad operates like an A/B switch: In default mode, the radio receives over-the-air signals that pass straight through the RediRad. In RediRad mode, music signals from your portable music player enter the RediRad via the audio input cable (that plugs into the portable’s headphone jack) and get converted into a radio-frequency signal that the radio treats like regular broadcast. Turn on the radio, tune it to the proper frequency and ENJOY! The RediRad returns to normal broadcast-receive mode within about 45 seconds of turning off the portable music player.

Back to top

 

My car is in storage until spring. When does my 60-day evaluation period start?

If you order a RediRad now but don’t have access to your car for a while (because it is in storage, getting serviced, repainted, etc.), simply let us know when you place your order and we will postpone the start of your 60-day evaluation period.

Back to top

 

Why does the RediRad-AM™ use the AM band?

Most pre-1970 cars were factory-equipped with only an AM radio.

Back to top

 

Does the RediRad add FM to my AM radio?

Not by itself. Think of the RediRad as a bridge between your existing radio and today’s portable music players. With an AM-only radio, you will use an inexpensive portable ‘walkman’-type of FM radio (available separately) and a RediRad to receive FM broadcast signals. This approach saves you hundreds of dollars over converting your AM-only radio just to have this functionality.

Back to top

 

Is RediRad™ compatible with digital (quartz) tuners?

AM-band RediRads (see application table above) will work but there may be background noise. If your radio has a digital display and an FM band, use the RediRad-FM for great results.

Back to top

 

Will I experience broadcast interference while listening to music from my portable source?

No. The RediRad electronically “disconnects” the antenna when you want listen with your portable player and automatically reconnects it when you’re done.

Back to top

 

Will the RediRad™ work with my original vacuum-tube radio?

Yes indeed!

Back to top

 

Does the RediRad™ add FM to my AM radio?

No. Think of the RediRad™ as a “gateway” between your AM radio and other portable music players. You will need a portable FM radio and a RediRad™ to receive FM broadcast. We stock an easy-to-use pocket FM radio if you need one.

Back to top

 

Can I tune in broadcast radio with the RediRad™ plugged into my portable player?

Yes, with your with your portable music source switched OFF.

Back to top

 

Will the RediRad™ degrade regular, over-the-air broadcast signal reception?

Not at all. Regular broadcast signals pass straight through when there’s no portable-player audio entering the RediRad.

Back to top

 

What are the electrical requirements to use the RediRad™?

Besides a portable music player, working radio and a speaker (or speakers), the RediRad™ is available for both 6V and 12V versions and for either positive or negative ground electrical systems.

Back to top

 

Does my car need an antenna to use a RediRad™?

Nope. If you have a rod or kustom without an antenna but a period correct radio, for the first time you can have the look you want and enjoy your tunes through it.

Back to top

Ask Your Questions Here!

Or check out our Customer Service page for more help.


Contact Us, Terms of Use, Customer Service, About Us image Contact Us Terms of Use Customer Service About Us Brew City Engineering Inc ©2005-2013 All Rights Reserved

lower corner image
lower corner image